• We burn Raspbian with Win32 Disk Imager
• Adds a ssh file to the root of the SD card
• We disconnect the SD card from the PC and put it in the Raspberry
• We let the Raspberry run until it connects to the local network, we see it through the router, a new DHCP client has appeared.
• Connect to the Raspberry with PuTTY
• We linger in pi/raspberry
• We launch sudo raspi-config to change the password of pi, to configure the SSH access, the locals, the hostname (putting snips) and to extend Filesystem, it reboot
• We reconnect with pi/new password
• We go to root:

sudo su -

• We're going to install NPM :

curl -sL https://deb.nodesource.com/setup_11.x | bash -

apt-get install -y nodejs

• We will install SAM:

sudo npm install -g snips-sam

• We're going to install Snips :

sudo apt-get update

sudo apt-get install -y dirmngr

sudo bash -c 'echo "deb https://raspbian.snips.ai/$(lsb _release -cs) stable main" > /etc/apt/sources.list.d/snips.list'

sudo apt-key adv --keyserver pgp.mit.edu --recv-keys D4F50CDCA10A2849

sudo apt-get update

sudo apt-get install -y snips-platform-voice

If pgp.mit.edu is down, use:

sudo apt-key adv --keyserver pgp.surfnet.nl --recv-keys D4F50CDCA10A2849

or

sudo apt-key adv --keyserver gpg.mozilla.org --recv-keys D4F50CDCA10A2849

sam connect snips (or sam connect localhost)

By being connected do

Sam Init

We can test a

sam status

But a lot of things are in red, which is normal.

We will configure the sound:

sam setup audio

Set Y to "Is it a Snips Makers Kit"

• It's gonna reboot.

sam connect

Sam test speaker

• The speaker must speak
• We'll test the microphone.

Sam Test Microphone

• If this does not work, you must:

sam setup audio

• Put N to the question
• Choose the speaker of the extension card (1) and validate
• We will log in (you must have a Snips login/password)

sam login

• Login
• The wizard shall be installed:

Sam install assistant

•  Answer questions with default values

Sam watch